LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Exterior Body Panels (Hood, Lids) (Service Information) JETTA) >> (55 Hood, Lids) >> Hood >> Insulation, Removing And Installing >> Seals, Removing And Installing >> Installing

Seals, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Push the seal -2- with the clips -3- into the hood.

NOTE:

Before installing the clips -3-, check for damage and replace if necessary.

scientia non olet · About LEMON Manuals