Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Unclip the coolant and fuel lines and set them aside.
-- Disconnect the connector -1- from the Camshaft Adjustment Valve 1 -N205-.
-- Place a clean cloth under the camshaft adjustment valves.
-- Remove the bolts -arrows- and then the Camshaft Adjustment Valve 1 -N205- -2-.