Vacuum Pump, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Unclip the vacuum line -2- from the bracket -arrow-.

-- Disconnect the vacuum hose -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1, 2 and 3- and carefully move the coolant line slightly to the side.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Risk of destroying the coolant pipes through deformation.

Never change the coolant pipe bend shape.

-- Remove the high pressure pump with the >>roller tappet<<. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING .

-- Loosen the bolts -1 through 3- and remove the vacuum pump.

NOTE:

Do not disassemble the vacuum pump.

-- The bolt -2- remains because of limited space after loosening the vacuum pump.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.