LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine System (Cylinder Head & VALVETRAIN System - Service Information - 1.8L; 2.0L TFSI - CPLA, CPPA, CPKA, CPRA)) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Overview - Camshaft Timing Chains >> Bearing Bracket With And Without Adapter Sleeve

Bearing Bracket With And Without Adapter Sleeve

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
GWWN15-11326Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

If a new bearing bracket -3- with adapter sleeve -4- should be installed, it must be checked before installing the bearing bracket in the hole -arrow- in the cylinder head -1-.

If the hole -arrow- is not designed for using the adapter sleeve -4- the adapter sleeve must be removed from the bearing bracket.

scientia non olet · About LEMON Manuals