Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING, VERSION 3: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

If the Charge Air Cooling Pump -V188- was removed from the bracket:

-- Engage the bottom of the retaining bracket -item ) Charge Air Cooling Pump -V188-, VERSION 3 - Retaining Bracket- in the bracket -item ) OVERVIEW - Charge Air Cooling Pump -V188-, VERSION 3-.

-- Remove the Charge Air Cooling Pump -V188-.

-- Make sure that the raised section on the rubber bracket -item ) Charge Air Cooling Pump -V188-, VERSION 3 - Rubber Bracket is in retaining bracket recess -item ) Charge Air Cooling Pump -V188-, VERSION 3 - Retaining Bracket-.

NOTE:

Secure all hose connections with standard production hose clamps.

-- Check the coolant level. Refer to Coolant Level, Checking After Repair .