Coolant Pump, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Replace the O-rings after removing them.

-- Clean and smooth the sealing surfaces of the O-rings.

-- Coat the new O-rings with coolant.

-- Install the toothed belt (adjust valve timing). Refer to TOOTHED BELT, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to COOLANT, FILLING .