LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Cooling System (General & Service Information - CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Lower Front Coolant Pipe, Removing And Installing >> Installing

Lower Front Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Replace the seals and O-ring after removal.

Secure all hose connections with standard production hose clamps.

-- Clean and smooth out the seals and O-ring sealing surfaces.

-- Coat the seals and O-rings with coolant.

-- Install the oil filter housing. Refer to OIL FILTER HOUSING, REMOVING AND INSTALLING .

-- Connect the coolant hose to the connector coupling. Refer to Connecting The Coolant Hose To Coupling .

-- Fill with coolant. Refer to COOLANT, FILLING .

scientia non olet · About LEMON Manuals