Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Unclip the coolant and fuel lines and move them to the side.

-- Disconnect the connector -1- from the Camshaft Adjustment Valve 1 -N205-.

Fig 1: Identifying Bolts And Camshaft Adjustment Valve 1

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and then the Camshaft Adjustment Valve 1 -N205- -2-.