Upper Timing Chain Cover, Removing And Installing: Installing

Fig 1: Upper Timing Chain Cover Tightening Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Replace the seals.

-- Install the cover on the cylinder head the tighten the bolts hand tight. While doing so make sure that the seal lays correctly on the cylinder head.

-- Tighten the bolts -1 through 6- in the sequence shown. Refer to Figure.

-- Install the Camshaft Adjustment Valve 1 -N205- and Exhaust Camshaft Adjustment Valve 1 -N318-. Refer to Camshaft Adjustment Valve 1 -N205- AND Exhaust Camshaft Adjustment Valve 1 -N318-, REMOVING AND INSTALLING .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Tightening Specifications 

• Refer to OVERVIEW - TIMING CHAIN COVER