LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Crankshaft, Cylinder Block [DKFA,CXDB]) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Removing

Ribbed Belt TENSIONER, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the ribbed belt from the tensioner. Refer to RIBBED BELT, REMOVING AND INSTALLING .

Fig 1: Drive Belt Tensioning Damper
GWWA13-10906Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and remove the ribbed belt tensioner -1- from the sub-assembly bracket.