All Wheel Drive Clutch Pump -V181-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

-- Switch the ignition off.

In some vehicles, the All Wheel Drive Clutch Pump -V181- may be covered with noise insulation, depending on vehicle equipment.

-- Then remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the wiring harness -arrow- for the All Wheel Drive Clutch Pump -V181-.

Fig 1: Disconnecting Wiring Harness

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1- for the All Wheel Drive Clutch Pump -V181- -2-.

-- Remove the All Wheel Drive Clutch Pump -V181- -2-.