Bevel Box, Differentiating, Golf And Golf Wagon

Either the "0AV" bevel box or "0CN" bevel box is installed.

The bevel boxes can be differentiated as follows:

Differentiation:, Bevel box installed: 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The bevel box is identified by a cut-out -arrow- near the right area of the subframe.

-- Remove the noise insulation if necessary. Refer to OVERVIEW - NOISE INSULATION .

The area indicated by the -arrow- has either the "0AV" or "0CN" designation.

Fig 1: Locating Bevel Box Identification

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Additional differentiation:, Bevel box removed:

The output flange is secured with a hex nut on a "0AV" bevel box.

The output flange is secured with a twelve-point nut on a "0CN" bevel box.