ENGINE FOR Transmission Fluid Auxiliary Hydraulic Pump 1 - V475-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal while noting the following:

-- Push the pump motor by hand evenly in the housing.

-- Tighten the pump motor.

-- Vehicles with front axle differential lock: install the front axle differential lock. Refer to FRONT AXLE DIFFERENTIAL LOCK, INSTALLING .

-- Install the right drive axle. Refer to DRIVE AXLE, REMOVING AND INSTALLING .

-- Fill with transmission fluid. Refer to TRANSMISSION FLUID, DRAINING AND FILLING .