Transmission, Securing On Engine And Transmission Holder
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Holding Plate: VW309A
- Transmission Support: VW353
- Engine and Gearbox Bracket: VAS6095A
Transmission, Securing in Engine/Transmission Holder
-- Mount the transmission to the : VW353 and place it, with the : VW309 in den : VAS6095 .
Tip:
Risk of fluid leaking when turning the transmission.
- Vents for the transmission housing must be closed when turning a filled transmission on the engine and transmission holder with the bleeder downward.