Clutch Slave Cylinder With Release Bearing, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Open the clip -2- with a screwdriver or a pointed tool and remove bleeder -4- from clutch slave cylinder -1-.

Fig 1: Bleeder At Slave Cylinder, Removal/Installation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-.

Fig 2: Identifying Slave Cylinder Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the clutch slave cylinder together with the release bearing -A-.