Clutch Mechanism Lines, Removing And Installing: Installing

Fig 1: Identifying Hose Clamp

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install in the reverse order of removal while noting the following:

-- Connect hose/line assembly -1- with clutch master cylinder.

-- Pull on the line to make sure it is secure.

-- Push the hose/line assembly -4- with the O-ring -3- onto the bleeder connection -1- until the clip -2- audibly locks into place.

Fig 2: Hose/Line Assembly Or Plastic Line On Breather, Removal/Installation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull on the line to make sure it is secure.

• After removing the :3094  , the return hose -2- (→ previous illustration) must be formed back into its original shape.

-- Bleed the clutch mechanism. Refer to CLUTCH MECHANISM, BLEEDING .

-- Install the entire air filter housing.

• Vehicles with turbo diesel engine. Refer to the appropriate service information
• Vehicles with a gasoline engine. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING [DKFA, CXDB] / AIR FILTER HOUSING, REMOVING AND INSTALLING [CZDA, DGXA, DJXA, CWLA]

Continuation for All

-- Install the battery tray, battery and the battery cover. Refer to BATTERY, REMOVING AND INSTALLING .