LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Gears, Hydraulic Controls (09S)) >> 38 Gears, Hydraulic Controls >> Valve Body >> Transmission Input Speed Sensor -G182- AND Transmission Output Speed Sensor -G195-, REMOVING AND INSTALLING >> Removing

Transmission Input Speed Sensor -G182- AND Transmission Output Speed Sensor -G195-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the valve body. Refer to VALVE BODY, REMOVING AND INSTALLING .

-- Remove the bolts -A arrows-.

GWWM38-10015Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Transmission Output Speed Sensor -G195- -1- with the spacer -2- from the transmission housing in the direction of -arrow-.

-- Remove the Transmission Input Speed Sensor -G182- -3- from the transmission housing in the direction of -arrow-.