Overview - Secondary Air System

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Secondary Air Injection System

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Air Filter Housing
- Removing and installing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
Connecting Line
- From the Secondary Air Injection Pump Motor -V101- to the air filter housing
Connecting Line
- From the Secondary Air Injection Solenoid Valve -N112- to the Secondary Air Injection Pump Motor -V101-
Secondary Air Injection Sensor 1 -G609-
Seal
- Replace after removing the Secondary Air Injection Solenoid Valve -N112-
Secondary Air Injection Solenoid Valve -N112-
- Secondary Air Injection Solenoid Valve -N112-, Removing and installing. Refer to Secondary Air Injection Solenoid Valve -N112-, REMOVING AND INSTALLING .
Bolt
- 9 Nm
Electric Connection
- For the Secondary Air Injection Solenoid Valve -N112-
Electric Connection
- For the Secondary Air Injection Sensor 1 -G609-
Nut
- 8 Nm
Secondary Air Injection Pump Motor -V101-
- Secondary Air Injection Pump Motor -V101-, Removing and installing. Refer to Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING .