Air Duct Pipe From Charge Air Cooler To Intake Manifold, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Loosen the hose clamp -2- and remove the air duct hose from the charge air cooler.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the hose clamp -2-.

Fig 1: Disconnect Charge Air Pressure Sensor Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Free up the coolant hose -3-.

-- Remove the bolts -arrows-.

-- Remove the Charge Air Pressure Sensor -G31-. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .

-- Remove the air duct pipe.