Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

The engine is cold.

-- Quickly open the coolant expansion tank cap -arrow- and release any remaining pressure in the cooling system and then close it again until it locks.

Fig 1: Identifying Coolant Reservoir Cap

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Disconnect the connector -1-.

Fig 2: Component Location Engine Coolant Temperature Sensor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove clamp -2- and Engine Coolant Temperature Sensor on Radiator Outlet -G83-.

NOTE:

Place a cleaning cloth underneath to catch any coolant leaking out.

To prevent coolant loss, immediately insert the new Engine Coolant Temperature Sensor on Radiator Outlet -G83- into the connection.