Engine Oil Cooler, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

NOTE:

Replace the gaskets and seals.

Secure all hose connections with standard production hose clamps. Refer to the Parts Information.

-- Install the engine oil cooler -3- with a new seal -2-.

Fig 1: Identifying Oil Cooler, Bolts And Seal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the sub-assembly bracket. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to Filling .