Valve Timing, Checking: Notes
WARNING: This page is about a different car, the 2016 Volkswagen Jetta and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Electronic Torque Wrench 3-60Nm :VAS6583
- Crankshaft Locking Pin :T10340
- Socket T30 :T10405
- Assembly Tool :T10487
- Camshaft Lock :T10494
NOTE:
This procedure also shows the engine at "TDC position for cylinder 1".
The valve timing is checked using the :T10494 .