LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Mechanical (Cylinder Head & VALVETRAIN System - General & Service Information - 1.4L - CNLA, CRJA)) >> 15 Cylinder Head, VALVETRAIN >> Toothed Belt Drive >> Toothed Belt Guard, Removing And Installing >> Upper Toothed Belt Guard, Removing And Installing >> Removing

Upper Toothed Belt Guard, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Jetta and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Free up the hoses on the bracket -3-.

GWWA15-11490Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -2-.

-- Loosen the clamps -arrows- and remove the upper toothed belt guard -1-.

scientia non olet · About LEMON Manuals