LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Mechanical (Cylinder Head & VALVETRAIN System - General & Service Information - 1.4L - CNLA, CRJA)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Overview - Cylinder Head >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2016 Volkswagen Jetta and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Cylinder Head
GWWA15-11369Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Replace the bolts that were tightened with an additional turn.

-- Tighten the bolts in steps in the sequence -1 to 10- :

Step Component Tightening Specification/Additional Turn
1 Bolts -1 through 10- 40 Nm
2 Bolts -1 through 10- 90° additional turn
3 Bolts -1 through 10- 90° additional turn
4 Bolts -1 through 10- 90° additional turn
scientia non olet · About LEMON Manuals