Tightening Specifications

WARNING: This page is about a different car, the 2016 Volkswagen Jetta and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Camshaft Housing Tightening Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolts -1 to 4- : M6 X 52
Bolts -5 to 15- : M6 X 65

Replace the bolts that were tightened with an additional turn.

NOTE:

There are different bolt lengths.

-- Tighten the bolts in the steps shown in the sequence:

Step	Component	Tightening Specification/Additional Turn
1	Bolts -1 to 15-	10 Nm
2	Bolts -1 to 15-	180° additional turn