Reducing Agent Heater Control Module -J891-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front passenger seat. Refer to FRONT SEATS .

-- Remove the sill panel strip. Refer to PASSENGER COMPARTMENT TRIM .

-- Fold up the carpet under the front passenger seat. Refer to the appropriate service information.

-- Release and disconnect the connector -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the bracket -2- from the body.

-- Release the catch -arrow- and remove the Reducing Agent Heater Control Module -J891- -1- from the bracket.