Reducing Agent Delivery Module, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Drain the reducing agent tank. Refer to REDUCING AGENT TANK, DRAINING .

-- Remove the reducing agent tank. Refer to REDUCING AGENT TANK, REMOVING AND INSTALLING .

-- Place the reducing agent tank on a clean surface.

-- While doing so, the delivery module must face upward.

-- Clean the area around the delivery module -5-.

-- Disconnect the connectors -1 and 3-.

-- Disconnect the reducing agent delivery line -2-. Refer to REDUCING AGENT DELIVERY LINE, DISCONNECTING .

-- To catch escaping reducing agent place a clean cloth under the separation point.

-- Seal all the open lines and connections with clean plugs from the :VAS6122 .

-- Remove the bolts -arrows-.

-- Carefully pry out the delivery module -5- from the opening -4- with a screwdriver.

-- Remove the delivery module from the reducing agent tank.