Reducing Agent Delivery Line, Disconnecting, Version 2

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Releasing:

-- Clean the area around the locking mechanism with water.

-- Push the connector opposite the removal direction.

-- Press and hold the locking mechanism -arrows-.

-- Remove the reducing agent line -2-.

-- To catch escaping reducing agent place a clean cloth under the coupling point.

-- Seal all the open lines and connections with clean plugs from the :VAS6122 .

-- Clean all components and connections with water and a lint-free cloth.

Locking:

-- Check the connection location and if necessary clean.

-- Check the connection location for damage and if necessary replace.

-- Slide on the line until it clicks into place.

-- Check that it is positioned correctly by pulling on it.