Overview - Reducing Agent Delivery Module
WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Reducing Agent Delivery Module
- Removing and installing. Refer to REDUCING AGENT DELIVERY MODULE, REMOVING AND INSTALLING .
- Spacer Sleeves
- Replace after removing.
- Belong to the repair kit contents
- Quantity: 3
- Shock Absorber
- Replace after removing.
- Belong to the repair kit contents
- Quantity: 3
- Seal
- Quantity: 2
- Bolt
- Replace after removing.
- 5.75 Nm
- Quantity: 3
- Reducing Agent Line
- From the reducing agent delivery module to the Reducing Agent Injector -N474-.
- With Reducing Agent Line Heater (Heating Circuit 2) -Z104-
- Overview. Refer to OVERVIEW - REDUCING AGENT DELIVERY LINE .
- Disconnecting the connector. Refer to REDUCING AGENT DELIVERY LINE, DISCONNECTING .
| Step | Bolt Markings on the Supply Line | Tightening Specification |
|---|---|---|
| 1 | S1 | 6 Nm |
| 2 | S2 | 6 Nm |
| 3 | S3 | 6 Nm |