Front Exhaust Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to NOISE INSULATION .

-- Release and disconnect the connector -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the clamping sleeve -2-.

-- Loosen the bolt -2- and remove the clamp.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1-.

-- Remove the front tunnel brace. Refer to UNDERBODY TRIM PANEL .

-- Push the clamping sleeve toward the rear.

-- Remove the front exhaust pipe.