LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Engine Mechanical (Cylinder Head & VALVETRAIN System - General & Service Information CBPA, CKJA)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Overview - Cylinder Head >> Checking Cylinder Head For Distortion

Checking Cylinder Head For Distortion

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
GWWA15-10931Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Check using Straight Edge - 500mm :VAS6075  and feeler gauge

Minimum distance of the linear surface: 100 mm

scientia non olet · About LEMON Manuals