LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Engine Mechanical (Cylinder Head & VALVETRAIN System - General & Service Information - 1.4L - CZCA, CZDA, CZTA)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Camshaft Seal, Removing And Installing >> Camshaft Seal For Transmission Side Exhaust Camshaft, Removing And Installing >> Removing

Camshaft Seal For Transmission Side Exhaust Camshaft, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the coolant pump toothed belt. Refer to COOLANT PUMP TOOTHED BELT SPROCKET, REMOVING AND INSTALLING .

NOTE:

Risk of chemical damage to the coolant pump seal due to oil entering between the coolant pump and the cylinder head.

-- Insert the :T20143/1  carefully between the camshaft and seal -1-.

GWWA15-11477Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the seal.

scientia non olet · About LEMON Manuals