LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Engine Mechanical (Cylinder Head & VALVETRAIN System - General & Service Information - 1.4L - CZCA, CZDA, CZTA)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Camshaft Seal, Removing And Installing >> Camshaft Seal For Intake Camshaft, Removing And Installing, Belt Pulley Side >> Removing

Camshaft Seal For Intake Camshaft, Removing And Installing, Belt Pulley Side: Removing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the camshaft adjuster. Refer to CAMSHAFT ADJUSTER, REMOVING AND INSTALLING .

-- Remove the seal -1- using the :T20143/1  .

GWWN15-10745Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals