Version 1
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Right and left coupling with release buttons -arrows-.
Opening
It is necessary to counterhold the fuel separating point -1- inside the engine compartment.
-- Insert the :T10468 between the heat shield and the fuel line stop -arrow- -2- and counterhold it.
Continue for all separation points on the fuel system:
-- Push the connector coupling -1- in direction of -arrow A-.
-- Press the release button and hold it down.
-- Disconnect the connector coupling -1- from the fuel line -2- in the direction of -arrow B-.
Follow the color coding when installing. Refer to Coupling Allocation .
The connector couplings must >>audibly<< engage when locking.
-- Pull on the connector coupling to make sure it is secure.