LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta R-Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Turbocharger System (Service Information - 2.0L - CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA)) >> 21 Turbocharger, Supercharger >> Turbocharger >> Overview - Turbocharger >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Step Bolts Tightening Specification
1 -1, 2, 3, and 4- Install by hand all the way
2 -2- 20 Nm
3 -1- 40 Nm
4 -3 and 4- 40 Nm


-- Tighten the bolts in steps according to the sequence:

Step Bolts Tightening Specification
1 -arrows- diagonal sequence starting from the inside and working outward 11 Nm
2 -arrows- diagonal sequence from inside to outward 22 Nm
3 -arrows- diagonal sequence from inside to outward 22 Nm
  • This measurement takes into account the component shrinkage.
scientia non olet · About LEMON Manuals