Vehicles Without Adjustable Exhaust Camshaft, Removing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the exhaust camshaft toothed belt sprocket. Refer to TOOTHED BELT SPROCKET, REMOVING AND INSTALLING .

Continued For All Vehicles.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the seal -1- using the :T20143/1 .

Installing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Do not coat the new seal with oil.

-- Slide the seal -1- over the :T10478/3 onto the :T10478/2 .

Installed position: the closed side of the seal faces the seal installer.

-- Separate the fitting sleeve and guide sleeve.

-- Position the :T10478/2 with the seal -1- on the camshaft.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the :T10478/1A with the Hexagon Bolt M10x1.25x46 :T10478/5 until it stops.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.