Exhaust Camshaft Adjuster, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Electronic Torque Wrench 3-60Nm :VAS6583
- Counterhold - Multiple Use :T10172A
- Counterhold :T10554
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolt - Intake Camshaft Toothed Belt Sprocket
Tools, Preparing
-- Attach the :T10172A and :T10554/1 using the : T10554/2 -arrows-.