LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta R-Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Engine Mechanical (Cylinder Head & VALVETRAIN System - General & Service Information - 1.4L - CZCA, CZDA, CZTA)) >> 15 Cylinder Head, VALVETRAIN >> Toothed Belt Drive >> Toothed Belt Guard, Removing And Installing >> Upper Toothed Belt Guard, Removing And Installing >> Removing

Upper Toothed Belt Guard, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Free up the hoses on the bracket -3-.

GWWA15-11490Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -2-.

-- Loosen the clamps -arrows- and remove the upper toothed belt guard -1-.

scientia non olet · About LEMON Manuals