LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta R-Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Engine Mechanical (Cylinder Head & VALVETRAIN System - General & Service Information - 1.4L - CZCA, CZDA, CZTA)) >> 15 Cylinder Head, VALVETRAIN >> Toothed Belt Drive >> Toothed Belt Guard, Removing And Installing >> Lower Toothed Belt Guard, Removing And Installing >> Installing

Lower Toothed Belt Guard, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Install the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals