Special Tools
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, and 2016 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Electronic Torque Wrench 3-60Nm :VAS6583
- Counterhold - Kit - Multiple Use :T10172 with Counterhold - Kit - Adapter 1 :T10172/1 and Counterhold - Kit - Adapter 2 :T10172/2
- Crankshaft Locking Pin :T10340
- Counterhold - Pulley :T10475
- Wrench - Open Ring - 30mm :T10499
- Insert Tool - 13mm :T10500
Special Tools And Workshop Equipment Required
- Counterhold - Multiple Use :T10172A
- Seal Installer - Camshaft :T10478B
- Seal Installer - Camshaft :T10479A
- Assembly Tool :T10487
- Camshaft Lock :T10494
- Counterhold :T10554
- Puller - Crankshaft/Power Steering Seal :T20143
- Valve Cotter Tool Kit - Adapter :T40012
- Socket - Xzn 12 :T40270
- Compression Tester Kit :VAG1763
- Valve Cotter Tool Kit :VAS5161
with the Valve Cotter Tool Kit - Guide Plate 32:VAS5161A/32
- Dial Gauge - 0-10mm :VAS6079
- Engine and Gearbox Bracket :VAS6095A
- Engine Bung Set :VAS6122
- Cylinder Head Tensioning Device :VAS6419
- Pliers - Valve Seal :VAS6770
- Dial Gauge Holder :VW387
- Engine Support Bridge :10-222A
- Engine/Gearbox Support Shackle (2 pc.) :10-222A/12
- Engine Support Bridge - Engine Support 18 :10-222A/18
- Engine Support Bridge - Engine Support 29 :10-222A/29
- Spark Plug Removal Tool :3122B
- Seal Installer - Valve Stem :3365
- Not illustrated:
- Intake Manifold Release Tool :T10527
- Intake Manifold Release Tool - 1 :T10527/1
- Engine Support - Basic Set - Adapter :T40091/1
- Engine Support - Basic Set - Adapter :T40091/3
- Engine Support - Basic Set - Adapter :T40093/3
- Engine Support - Basic Set - Adapter :T40093/3-6