LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta R-Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Engine Mechanical (Cylinder Head & VALVETRAIN System - Service Information - 2.0L - CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Camshaft, Measuring Axial Clearance >> Procedure

Camshaft, Measuring Axial Clearance: Procedure

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the camshaft housing. Refer to CAMSHAFT HOUSING, REMOVING AND INSTALLING .

-- Secure the :VAS6079  on the camshaft housing with the :VW387  as shown.

-- Press the camshaft against the dial gauge by hand.

-- Set the dial gauge to "0".

-- Push the camshaft off the dial gauge and read the value:

scientia non olet · About LEMON Manuals