High-Mounted Brake Lamp Bulb, Removing And Installing

The High-Mounted Brake Lamp Bulb -M25- contains individual LEDs.

If one of the LEDs in the High-Mounted Brake Lamp Bulb -M25- is faulty:

• The individual LEDs in the High-Mounted Brake Lamp Bulb -M25- are in groups of four and are supplied with electricity as a group.
• The High-Mounted Brake Lamp Bulb -M25- is designed in such a way that it still meets legal requirements when one LED group fails.
• If another LED group fails, these legal requirements are no longer met.
• When one LED group fails, the intact LEDs are given a higher load, by which failure of other LED groups can be assumed in the near future.

Replace the high-mounted brake lamp if more than four individual LEDS in the High-Mounted Brake Lamp Bulb -M25- have burned out. Refer to HIGH-MOUNTED BRAKE LAMP, REMOVING AND INSTALLING .