LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta R-Line, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Crankshaft & Cylinder Block (General & Service Information - CVCA, CUUA, CUUB, DELA, DEBA, DEJA, DGMA)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Sealing Flange, Removing And Installing, Transmission Side >> Assembling

Sealing Flange, Removing And Installing, Transmission Side: Assembling

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Assemble in the reverse order of removal. Note the following:

Vehicles With Two-Piece Oil Pan 

-- Install the oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .

-- Install the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

Vehicles With One-Piece Oil Pan 

-- Install the oil pan. Refer to OIL PAN, REMOVING AND INSTALLING .

Continuation For All Vehicles 

-- Install the intermediate plate. Refer to Installing Intermediate Flange .

-- Install the flywheel. Refer to FLYWHEEL, REMOVING AND INSTALLING .