Ribbed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Mount The Ribbed Belt On The Ribbed Belt Pulley

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Vibration damper
Tensioning Roller
Generator
A/C Compressor

-- Hold the tensioner with a wrench and remove the :T10060A .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the tension on the tensioner.

-- Check the ribbed belt for correct positioning.

-- Start the engine and check the ribbed belt routing.