Engine Support, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
-- Remove the upper toothed belt guard. Refer to TOOTHED BELT GUARD, REMOVING AND INSTALLING .
-- Raise or lower the engine using the :10-222A/11 until each bolt in the engine support is accessible.
NOTE:
The bolt -2- can only be removed after the engine support is removed.
-- Remove the bolts -1, 2 and 3- and the engine support.