Needle Bearing, Installing

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clean the bearing seat in the crankshaft and thinly coat with grease.

-- Drive the needle bearing into the crankshaft up to the installation depth using the :VW207C .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

If the needle bearing was unintentionally driven in too deeply, it must be replaced, because it will be damaged when it is removed again.