LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Jetta R-Line, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger [CZDA,DGXA,DJXA,CWLA] >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -GX26-, REMOVING AND INSTALLING >> Installing

Charge Air Pressure Sensor -GX26-, REMOVING AND INSTALLING: Installing

Install in reverse order of removal and note the following:

-- Replace the O-ring.

NOTE:

If the tabs break while being removed, the sensor can alternatively be mounted with two bolts. Refer to the Parts Information.

scientia non olet · About LEMON Manuals