Charge Air Cooler, Removing And Installing: Removing
-- Remove the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .
-- Open the clamp -1- and push the hose -arrow- to the side.
-- Disconnect the connector -1-.
-- Remove the A/C compressor from the bracket -arrows- and tie it up. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING FROM BRACKET .
-- Place the : VAS6208 underneath.
-- Clamp off the coolant hoses on the charge air cooler using the : 3094 .
-- Loosen the hose clamps -1- and remove the coolant hoses.
-- Remove the bolts -arrows-.
-- Pull the charge air cooler -1- forward and at the same time in direction of -arrow- out of the intake manifold.