Charge Air Cooler, Removing And Installing: Installing

Install in reverse order of removal and note the following:

-- Install the sealing strip -1- on the charge air cooler -2- in direction of -arrow-.

Fig 1: Identifying Charge Air Cooler

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the new seal into the groove in the intake manifold.

-- Tighten the bolts -arrows- diagonally starting from the center and working outward.

Fig 2: Locating Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the clamps -1-.

-- Install the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .

-- Check the coolant level. Refer to Coolant Mixture Ratio - Check the coolant level. .