Air Duct Pipe, Removing And Installing: Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Free up the air duct hoses on the air duct pipe.

-- Remove the connector from the Charge Air Pressure Sensor -GX26-.

-- Release the retainers -arrows- using the : T10527  and : T10527/1  .

Fig 1: Locating Intake Manifold Release Tool And Retaining Tabs

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the air duct pipe -1-.

-- Seal the open connections with clean plugs from the : VAS6122  .